Product ID:WEAR RESISTANT LIQUID(WR)-RESIN
MSDS Date:01/01/1987
FSC:8030
NIIN:00-333-4532
Kit Part:Y
MSDS Number: BDWVT

Emergency Phone: 617-777-1100

Cage: 16059

Telephone: 1-508-777-1100

Cage: 16059

Effects of Overexposure:EYE:MILD IRRIT.SKIN:MILD IRRIT.INHAL:N/K.

First Aid:EYE:FLUSH W/ WATER FOR 15 MIN.GET MED ATTENT.SKIN:WASH W/
SOAP,WATER.GET MED ATTENT IF IRRIT DEVELOP.INGEST:DO NOT INDUCE
VOMIT.GIVE 2 GLASSES OF WATER.GET MED ADVICE.INHAL:REMOVE TO FRESH
AIR.GIVE 0* 2.GET MEDICAL ATTENTION.

Flash Point:>400F,>204C PMCC
Extinguishing Media:CO*2,DRY CHEMICALS.POLYMER FOAMS FOR LARGE FIRES.
Fire Fighting Procedures:WEAR SCBA AND PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE(PER MFR).

Spill Release Procedures:PREVENT SKIN,EYE CONT.SCRAPE UP,DISCARD IN
SUITABLE CONTAINER.USE ABSORBENT MATRL-WASH SPILL AREA W/
INDUSTRIAL CLEAN AGENT.IF SOLVENT USED FOR CLEAN TAKE PRECAUTIONS
AGAINST FIRE,PERSONAL OVEREXPOSUR E.

Handling and Storage Precautions:STORE IN COOL,DRY PLACE.HAND IN ACCORD
W/ POTENT HAZ OF CURING AGENT USE.DESTROY LEATHER ARTICLE,INCLUD
SHOES.REMOVE WASH CONTAM CLOTH.PROTECTIVE GEAR
Other Precautions:WASH AFTER USE,BEFORE EATING,SMOKING.IF CURED
MATERIAL IS SANDED OR MACHINED,USE PROPER PRECAUT.WEAR PROT EQUIP
TO PREV OVEREXPOS TO PARTICLE.SM AMT GRAPHITE DUST MAY BE
GENERATE.SUPP DATA.

Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURE.
Ventilation:LOCAL EXHAUST RECM FOR CONFINE AREA,GEN VENT FOR NORM USE.
Protective Gloves:CHEM RESIST RUB
Eye Protection:SIDE SHIELD SAFETY GLASSE
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRE TO PREVENT
SKIN CONTACT.
Supplemental Safety and Health
MSDS PREP 01OCT85,OTH PREC GRAPHITE DUST TLV-TWA 2.5 MG/CUM. HEAT IS
GENERATE WHEN RESIN MIX W/EPOXY HRD, USE CAUTION WHEN MIX LRG
QTY,CAL MFR FOR UI QTY IDENTITY OF PRT OF KIT RESPIRATORY KEY 1:N1

HCC:B3
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:2.1
Solubility in Water:NIL
Appearance and Odor:DARK GRAY PASTE;LOW ODOR.
Percent Volatiles by Volume:0.0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:OPEN FLAME,EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF C,ALDEHYDES,ACIDS FROM
INCOMPLETE COMBUSTION.

Waste Disposal Methods:REMOVE TO A WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE W/ FEDERAL,STATE,LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.